Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Tuesday 30 June 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Summer Legend

This tutorial was written by me on June 30, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist:Zlata_M
You can find this tube  HERE
Please do not use this tube unless you have a license.
Scrap Kit: Summer Breeze By Scrappin With Lil Ole Me
You can buy this kit at Mystical Scraps  HERE
MaskWSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 13.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.

(see tag for placement) 
 
There is no frame layer
Now onto some elements: 
Element 122 - C/P and re-size to 50%.  Move to top middle of tag.
(see tag for placement)
Element 54 - C/P and move to top left side of tag.  Duplicate and mirror.
(see tag for placement)
Element 49 - C/P and move to upper right side of tag.
(see tag for placement)
Element 83 - C/P and re-size to 75%.  Move down just a little bit on tag.
(see tag for placement)
Element 186 - C/P and move just a tad to the right on tag.
(see tag for placement) 
Element 146 - C/P move just a tad to the left on tag.
(see tag for placement)
  Element 58 - C/P and re-size 50%.  Move over element 146 to make it look like it is growing over the tree stump.
(see tag for placement)
  Element 151 - C/P and re-size to 75%.  Move to lower middle of tag in front of element 146 and 58.
(see tag for placement)
Element 149 - C/P and re-size to 25%.  Move to lower right side of tag.
(see tag for placement)
Element 184 - C/P and re-size to 50%.  Move to lower left side of tag over element 151.
(see tag for placement)
Element 138 - C/P and re-size to 75%.  Move to bottom middle of tag.
(see tag for placement)
Element 142 - C/P and re-size to 25%.  Move to bottom left side of tag.
(see tag for placement)
Element 144 - C/P and re-size to 25%.  Move to bottom left side of tag in front of element 142.
(see tag for placement)
 Element 34 - C/P and re-size to 75%.  Move to bottom left corner of tag in front of elements 142 and 144.
(see tag for placement)
Element 132 - C/P and re-size to 15%.  Move to lower right side of tag in front of 149.
(see tag for placement)
Element 53 - C/P and re-size to 25%.  Move to bottom right corner of tag in front of element 132.
(see tag for placement)
Element 21 - C/P and re-size to 25%.  Move to bottom right corner but to the left of element 53.
(see tag for placement)
Element 52 - C/P and re-size to 25%.  Move to bottom right corner but to the left of element 21.
(see tag for placement)
Element 90 - C/P and re-size to 20%.  Move to bottom right corner over element 52.
(see tag for placement)
 
I placed the tube layer(s) here: 
If you are using the same tube as me, grab it now.  C/P and re-size to 50%.  Move to bottom middle of tag.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   

Thursday 25 June 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Pirate Booty

This tutorial was written by me on June 25, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Amberly Berendson
This is a Free To Use tube and can be found @ My Tubed Art Yahoo Group and you will need to sign up for their group  HERE
Even Though this is FTU, Please do not use this tube unless you have a license.
Scrap Kit: Aloha by Daniela E
You can buy this kit at Inspirations Of Scrap Friends  HERE
MaskWSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.

(see tag for placement) 
 
There is no frame layer
Now onto some elements: 
Element 2 - C/P and move to top left corner of tag.
(see tag for placement)
Element 128 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 72 - C/P and move to right side of tag.
(see tag for placement)
Element 36 - C/P and move to left side of tag.
(see tag for placement)
Element 13 - C/P and move to bottom middle of tag.
(see tag for placement) 
Element 88 - C/P and re-size to 50%.  Move to upper middle of tag over element 13.
(see tag for placement)
  Element 31 - C/P and move to bottom middle of tag over element 13.
(see tag for placement)
  Element 29 - C/P and re-size to 50%.  Move to bottom left side of tag, but more near the middle.
(see tag for placement)
Element 27 - C/P and re-size to 50%.  Move to bottom left corner of tag, but to the left of element 29.
(see tag for placement)
Element 90 - C/P and re-size to 50%.  Move to bottom left corner of tag and on the left side of element 27.  Duplicate and mirror.  Move to right side of element 29.
(see tag for placement)
Element 101 - C/P and re-size to 50%.  Move to bottom left side of tag between element 90 and copy of element 90.
(see tag for placement)
Element 120 - C./P and re-size to 50%.  Move to bottom left side of tag in front of element 101.
(see tag for placement)
Element 135 - C/P and re-size to 30%.  Move to bottom right corner of tag.
(see tag for placement)
 Element 95 - C/P and re-size to 15%.  Move to bottom left side of tag in front of the bottom right side of element 120.
(see tag for placement)
Element 99 - C/P and re-size to 15%.  Move to bottom left side of tag, but to the left of element 95.
(see tag for placement)
Element 97 - C/P and re-size to 15%.  Move to bottom left side of tag and on the bottom far left corner of element 120.
(see tag for placement)
Element 96 - C/P and re-size to 15%.  Move to bottom left side of tag, but to the right of element 97.
(see tag for placement)
Element 98 - C/P and re-size to 15%.  Move to bottom left side of tag in front of element 96 and 99.
(see tag for placement)
Element 48 - C/P and re-size to 20%.  Move to bottom right corner of element 120.
(see tag for placement)
Element 47 - C/P and re-size to 20%.  Move to bottom left corner of element 120 and in front of element 97.
(see tag for placement)
 
I placed the tube layer(s) here: 
If you are using the same tube as me, grab it now.  C/P and re-size to 50%.  Move to bottom of tag in between element 120 and 135 but on top of all other layers.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Tuesday 16 June 2015
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Victorian Delight

This tutorial was written by me on June 16, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Maxine Gadd
You can find this tube at Creative Design Outlet   HERE
I bought this tube tube at MPT but they are no longer in business.
Do not use this tube unless you have a license.
Scrap Kit: Victorian Delight by Creative Crazy Scraps
You can find this kit at Creative Crazy Scraps  HERE
Mask: WSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 9.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 9 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
  Element 3C/P and free rotate 30º right.  leave it in the middle of the tag.  Make sure element 3 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 8.
If you are using the same tube as me, grab it now.  C/P over frame and then move her into position.  Duplicate and move the copy under frame but over paper layer.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand tool and click in the middle of frame.   
SELECTIONS - INVERT, grab the eraser tool now.  Erase the parts of the original tube you don't want.  SELECTIONS - SELECT NONE.
(see tag for placement)
 
Now onto some elements: 
Element 9 - C/P and re-size to 50%.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 2 - C/P and move to upper left corner of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).  Duplicate and move to bottom right corner.  Move this layer over original tube layer.
(see tag for placement)
Element 17 - C/P and re-size to 75%.  Move to top right corner of frame.
(see tag for placement)
Element 5 - C/P and re-size to 50%.  Move to top right corner of tag.
(see tag for placement)
Element 12 - C/P and move to bottom right corner of tag.
(see tag for placement)
 Element 14 - C/P and re-size to 75%.  Move to bottom right corner of tag over element 12.
(see tag for placement) 
Element 8 - C/P and re-size to 75%.  Move to bottom left corner of tag.
(see tag for placement)
Element 13 - C/P and re-size to 50%.  Move to bottom left corner of tag and to the right of element 8.
(see tag for placement)
Element 20 - C/P and re-size to 50%.  Move to top middle of tag.
(see tag for placement)

Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   

Tuesday 9 June 2015
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Dragon Princess

This tutorial was written by me on June 9, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Lori Karels
I bought this tube and The PSP Project  HERE
I bought this tube when Lori was selling at Up Your Art.
Do not use this tube unless you have a license.
Scrap Kit: Dragon Princess by Scrappin with Lil Ole Me
You can buy this kit at Mystical Scraps  HERE
MaskWSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 2.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.

(see tag for placement) 
 
There is no frame layer
Now onto some elements: 
Element 10 - C/P and move to top right corner of tag.
(see tag for placement)
Element 148 - C/P and move to bottom right corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 9 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 8 - C/P and re-size to 50%.  Move to top left side of element 9.
(see tag for placement)
Element 107 - C/P and re-size to 75%.  Move to bottom left side of tag.
(see tag for placement) 
Element 17 - C/P and move to bottom left corner of tag.  Duplicate and mirror.
(see tag for placement)
  Element 103 - C/P and move to bottom middle of tag.
(see tag for placement)
  Element 145 - C/P and re-size to 50%.  Move to bottom left side of tag.  Duplicate and mirror.
(see tag for placement)
Element 13 - C/P and move to top middle of tag.
(see tag for placement)
Element 33 - C/P and re-size to 25%.  Move to upper right side of tag.
(see tag for placement)
 
I placed the tube layer(s) here: 
If you are using the same one as me, grab it now.  C/P and move her into position at the bottom middle of tag and make it so that element 13 could be coming from the tube's hand.
(see tag for placement)
 
  Element 53 - C/P and move this element in front of tube layer.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Saturday 6 June 2015
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Spring Breeze

This tutorial was written by me on June 6, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Renee Biertempfel
You can find this tube at Creative Design Outlet   HERE
Do not use this tube unless you have a license.
Scrap Kit: ScrapLHD_SpringsAwakening-mini by Ladyhawwk Designs
You can find this kit at Creative Design Outlet  HERE
Mask: WSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 12.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 12 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
  Frame 3C/P and re-size 75%.  Move it up just a little bit.  
Frame 1 - C/P and re-size to 50%.  Move it up on top of Frame 3.  
Make sure frame 3 layer is highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 5.
If you are using the same tube as me, grab it now.  C/P over frame and then move her into position.  Duplicate and move the copy under frame but over paper layer.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand tool and click in the middle of frame.   
SELECTIONS - INVERT, grab the eraser tool now.  Erase the parts of the original tube you don't want.  SELECTIONS - SELECT NONE.
(see tag for placement)
 
Now onto some elements: 
Element 8 - C/P and move to right side of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 11 - C/P and move to top, but a bit to the left on tag.  Make sure this layer is also UNDER the frame layer(s). 
(see tag for placement)
Element 15 - C/P and re-size to 75%.  Move to top left corner of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 14 - C/P and re-size to 50%.  Move to middle right side of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s), but under original tube layer.
(see tag for placement)
Element 44 - C/P and move to top left side of frame.  Make sure this is also under original tube layer.
(see tag for placement)
 Element 16 - C/P and re-size 50%. Move to left side of frame.  Make sure this is also under original tube layer.
(see tag for placement) 
Element 9 - C/P and re-size 75%.  Move to bottom middle of frame.  Make sure this is also under original tube layer.
(see tag for placement)
Word Art - C/P and re-size to 75%.  Move to bottom middle of frame over element 9.  Make sure this is also under original tube layer.
(see tag for placement)
Element 10 - C/P and move to bottom left corner of tag.  Make sure this and all other elements are OVER the original tube layer.
(see tag for placement)
Element 18 - C/P and re-size to 50%.  Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size to 50%.  Move to bottom middle of tag.
(see tag for placement)
 Element 13 - C/P and re-size to 30%.  Move to top left side of tag over element 44.
(see tag for placement)
Element 21 - C/P and re-size to 25%.  Move to upper right side of tag over element 15.
(see tag for placement)
Element 22 - C/P and re-size to 25%.  Move to bottom middle of tag over WORD ART and element 7. 
(see tag for placement)
Element 51 - C/P and re-size to 50%.  Move to bottom right corner of tag.
(see tag for placement)
Element 24 - C/P and re-size to 50%.  Move to lower left side of tag over element 10.
(see tag for placement)
Element 23 - C/P and re-size to 50%.  Move to bottom left corner of tag and to the right of element 51.
(see tag for placement)
Element 17 - C/P and re-size to 30%.  Move to bottom left side of tag but to the right of element 18.
(see tag for placement)

Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me